| |
The following is a list of our newest products. Click here to view a list of Recent Product Press Releases.
 Our catalog is in PDF format. You will need Adobe Acrobat Reader to see it. Download a free copy of Acrobat Reader here.
Expanded Fill Sealing Fittings for Hazardous Locations
Type EYAX
| |
Used
to seal vertical or horizontal conduit runs where 40% conductor
fill is required. Provides a seal at the enclosure or at the
boundary between hazardous and ordinary locations. Malleable
Iron with Zinc Electroplate, with Hot Dip or mechanical Galvanize
as an optional finish. |
 |
More
Information on this Series |
|
 |
Expanded Fill Drain - Seal Fittings for Hazardous Locations
Type EYDX
 |
|
| |
Used
to seal and drain vertical conduit runs where 40% conductor
fill is required. Provides a seal at the enclosure and a continuous
water drain path while allowing the conduit run to breath. Malleable
Iron with Zinc Electroplate, with Hot Dip or mechanical Galvanize
as an optional finish. |
|
More
Information on this Series |
|
 |
Large Flexible Couplings for Hazardous Locations
Type ECGJH
|
|
| |
Flexible
couplings now available in 2 182" through 4" Trade
Size, complimenting our existing product line from 1/2"
through 4" with a standard or grounding locknut. Standard
construction is zinc die cast with KO gasket and insulated throat.
Chrome plating is optional. |
|
More
Information on this Series |
|
 |
Die Cast Watertight Hubs & Grounding Locknuts
Type CHM / CHMG
|
|
| |
Provides
a watertight and dust tight NEMA 4X connection for rigid conduit
and IMC into a knockout of a box or enclosure. Suitable for
use indoors and outdoors, and in Class l, Div. 2, Class ll and
Class lll Hazardous Locations. Available in trade sizes 1/2"
though 4" with a standard or grounding locknut. Standard
construction is zinc die cast with KO gasket and insulated throat.
Chrome plating is optional. |
|
More
Information on this Series |
|
 |
ETP Steel Liquidtight Connectors - Type 4Q-S
|
|
| |
Complimenting
O-Z/Gedney's already extensive line of Malleable Iron Liquidtight
Connectors, Type 4Q-S is an all-steel fitting in straight connectors,
with malleable iron bodies and steel gland nuts on 45° and
90° angle connectors. Available form 3/8" to 2' trade
size, with reusable ferrules, locknut and KO sealing ring. |
|
More
Information on this Series |
|
 |
Steel Outlet and Switch Boxes
|
|
| |
Complete
product offering of handy boxes, round and octagon boxes, 4
inch square and 4-11/16" boxes, with numerous mounting
bracket, KO and cable clamp configurations. Switch boxes are
available in all styles, including KO, cable clamp, solid gang
and gangable. Standard and eccentric KO's are available, as
well as wide range of covers and accessories. |
|
More
Information on this Series |
|
 |
Weatherproof Boxes, Covers, Lampholders and Lighting
|
|
| |
Extensive
offering of weatherproof products including round, single gang
and double gang threaded boxes, device covers and lamplholders
for indoor and outdoor use, in wet, damp or dry locations. Weatherproof
incandescent fixtures complete the package, along with switch
and photocell accessories and replacement parts. |
|
More
Information on this Series |
|
 |
Cast Junction Box Improvements
|
|
| |
Surface
mount cast junction boxes are now available with mounting lugs
as standard equipment on all enclosures greater than 100 cubic
inches, to meet NEC mounting requirements and maintain watertight
integrity. For extreme corrosive applications, aluminum, cast
boxes are now available with an optional epoxy coating to meet
NEMA 4X installation conditions. |
|
More
Information on this Series |
|
 |
Zone 2 DM, MB and FM Series
|
|
| |
Has
all the great features of the NEC DM, MB and FM Series only
designed for IEC Zone 2; AEx nR llC locations where the method
of protection is Restricted Breathing, IP66 and NEMA 4X applications. |
|
More
Information on this Series |
|
 |
NFR/NFD/NFZ Series Non-Metallic Fluorescent Fixtures
|
|
| |
Non-Metallic
fluorescent lighting fixtures for adverse and hazardous locations.
The NFR series is suitable for wet locations and is UL listed
for 1598. The NFD series is UL listed for NEC Class I Div. 2
and Class I Zone 2 IIC T5 locations. The NFZ series is listed
for IEC Zone 2;AEx nA IIC IP65. |
|
More
Information on this Series |
|
 |
Zone 2 FH Series Floodlights
|
|
| |
Powerful,
efficient, weatherproof floodlights used where flammable gases
and vapors are present under conditions defined as Zone 2. The
method of protection is Restricted Breathing, also listed for
IP66. |
|
More
Information on this Series |
|
 |
CID2 Series Non-Metalilic Emergency Lighting System
|
|
| |
Provides
emergency lighting in the event of a power outage in Class II
Div.2, Groups B, C and D locations. Available for use with remote
and/or direct mounted fixture heads. |
|
More
Information on this Series |
|
 |
Indoor General Lighting
|
|
| |
Low
Bay, 150 watt through 450 watt HID fixtures; High Bay,
150 watt through 1000 watt HID fixtures. Efficient, low glare,
fixtures are ideal for illuminating manufacturing, storage and
other indoor areas. |
|
More
Information on this Series |
|
 |
Outdoor General Lighting
|
|
| |
Quartz
floodlights 300 through 1500 watt incandescent, Compact
Wide Beam Floodlights for use with 50 through 175 watt medium
base HID lamps, Wide Beam Floodlights for use with 175
through 1000 watt mogul base HID lamps. Wall Packs for
use with 35 through 150 watt medium base GID lamps and General
Purchase or Heavy Duty Sports Floodlights 1000 through
1500 watt mogul base lamps. |
|
More
Information on this Series |
|
 |
Poles and Brackets
|
|
| |
Round
Tapered, Square, Square Tapered, Hinged Steel poles. Metal Pole
Brackets, Metal/Wood Pole Brackets, Poletop Reducers and Wood
Pole Brackets. This line will meet most of your fixture
mounting requirements. |
|
More
Information on this Series |
|
 |
Flexible Fixture Hangers
|
 |
Hazardous Location Fixture Hangers
|
|
| |
Rigid
or flexible cushion fixture hangers for use with Threaded Rigid
Metal Conduit. For suspension of industrial type fixtures in
Class I, Class II and Class III locations. These are also suitable
in areas where moisture, dust and corrosive atmospheres are
present. |
|
More
Information on this Series |
|
 |
NLPN, NPPN, and NGPN Panelboards
|
 |
NPPF Factory Sealed Power Panelboards
|
|
| |
Ensure
reliable circuit protection in demanding industrial settings
that are Class I, Division 1 & 2; Class II, and Class III
locations requiring up to 600 Volts. |
|
More
Information on this Series |
|
 |
NEB Series Motor Starters
|
|
| |
Provide
under voltage protection, circuit protection, and disconnecting
means for motors up to 600 volt and 100 HP in Class I, Division
1, Groups B, C, D; Class II, and Class III locations. NEMA 4X
is standard to provide the ultimate in corrosion and water-ingress
protections! |
|
More
Information on this Series |
|
 |
NETE Instrument and Meter Enclosures
|
 |
NCSEW Control Centers
|
|
| |
Solve
the need for complex controls in Class I, Class II, and Class
III hazardous locations. Combining the finest line of enclosures
in the industry with a broad selection of controls, OZ Gedney
brings limitless choices for your unique industrial control
challenges. |
|
More
Information on this Series |
|
 |
NJBEW Junction Boxes
|
|
| |
Offer
a multitude of choices for Class I, Class II, and Class III
hazardous location applications. Copper-free aluminum ensures
a superior level of corrosion resistance. |
|
More
Information on this Series |
|
 |
NE Bolted Circuit Breaker Enclosures
|
|
| |
Provide
overload and short circuit protection for industrial grade power
applications in Class I, Class II, and Class III hazardous locations.
NEMA 4X rating is standard! |
|
More
Information on this Series |
NE Disconnect Switches
|
|
| |
Offer
a solution to challenges for 30, 60, 100 or 200 amp disconnecting
means in application up to 600 VAC in Class I, Groups B, C,
D and NEMA 4X environments. |
|
More
Information on this Series |
|
 |
NEPGI Explosionproof Ground Indicators
|
|
| |
Provide
grounding for tank cars during transfer of combustible materials
in Class I hazardous locations. Visual ground indication with
interlocking circuitry provide added protection. |
|
More
Information on this Series |
|
 |
For Immediate Release from O-Z/Gedney:
|
01/03/2002
|
O-Z/Gedney Flexel Hand-Bendable Fittings Eliminate Need for Bending Machines
|
|
|
12/06/2001
|
OZ/Gedney Speedlock™ Steel Box Connectors Allow Contractors to Simply Tilt In & Snap Down for Secure, Tight Connections
|
|
|
11/22/2001
|
O-Z/Gedney Introduces Watertight Hubs
|
|
|
11/19/2001
|
O-Z/Gedney Enters Weatherproof Electrical Products Market, Publishes
New Catalog |
|
|
11/05/2001
|
O-Z/Gedney Catalog Details Indoor/Outdoor General Lighting Fixtures
& Accessories |
|
|
10/18/2001
|
O-Z/Gedney’s Non-Metallic Emergency Lighting System is Available
with Remote & Direct Mounted Lamps |
|
|
|
